Product Name:	wall cabinet
Material:	Frame board melamine plywood / Back board 3mm /5mm melamine MDF/Door PVC MDF /Customized
Size:	Customized
Color:	Customized
Design:	we have professional designer ,can be as your require
payment:	30% in advance ,70% after recevied the BL copy

Installing a wall cabinet on the wall can save space and increase storage. So how do you install the wall cabinet?

Step 1. Measure the wall cabinet; the cabinet body of the wall cabinet can be either a wall or a mezzanine. The top and bottom must be horizontal and both sides vertical. If there is an error, the height difference between the left and right sides of the opening is required to be less than 5 mm, and the bottom wheel of the cabinet door can make up for the error through the debugging system.

Step two, install the drawer; the cabinet body of the wall cabinet generally has a drawer design, in order not to affect the use, pay attention to the position of the drawer when designing the position of the drawer: when making three sliding doors, avoid the intersection of the two doors; make two sliding doors When making a folding door, it should be placed on one side of a door; when making a folding door, there should be a 17 cm gap between the drawer and the side wall.

Step 3: Install the rail; when making the cabinet, you need to reserve the size for the rail. The reserved size for the upper and lower rails is 8 cm for folding doors and 10 cm for sliding doors.

Step 4: Install the cabinet door; first, fix the top rail, the front surface of the rail and the surface of the wall cabinet are on the same plane, and the upper and lower rails are placed flat in the reserved position. Then put the two doors into the rails, measure the verticality of the door with a level or ruler, adjust the position of the upper and lower rails and fix them; check again whether the door is parallel to both sides, and adjust the door by adjusting the bottom wheel Reach the level of the frame and both sides; finally fix the anti-jump device